The advantages of Solar First tile roof mounting system

Over the past decade, Solar First installation solutions have evolved to cover almost all types of roofs, especially tile roofs. Solar First tile roof mounting system has designed thoughtfully, attractively, and constantly improving.
Tile roof is quite suitable for installing solar power system. This is because roofing tile is installed individually, it leaves space around each tile to allow for solar PV installation. So you can save your energy costs by adding solar panels to your tile roof. With the appropriate size system for your home, you can expect massive solar power.

There are so many type of solar mounting systems. But why to chose Solar First tile roof mounting system? Below are some reasons couldn’t be ignored.
1.Install safely & remove conveniently 
We all know that the installation of traditional solar mounting brackets need to drill holes on the roof, which will damage the roof and cause instability and leakage of the solar mounting structures. However, Solar First tile roof solar mounting system, you can attach its brackets to the roof without damaging the tiles. So that it can provide superior protection against leaks, preserving the surface of your roof. Moreover, it is convenient to replace the tiles or the mounts if needs. 
2. Flexible design
Solar hook (SF-IK-01) is the most important part to Solar First tile roof mounting system. It is specially designed to installed solar PV panels on the tile roof without damaging them.
3.Perfect Function
According to the general investigation, a perfect solar roof mounting system needs to meet the following conditions:
a. High Strength. 
Solar roof mounting system has to be strong enough to safely support the PV modules and other equipment, and remain secure and in roofs under the stresses of wind or snow loads. Solar roof mounting brackets can be either rail-based or rail-less systems.
b. Long Durability. 
Solar roof mounting system should last at least as long as the roof—preferably much longer. It may be required decades years, which is about 25 years. 
c. Nice Appearance. 
Both consumers and PV engineers appreciate a nice appearance solar solution. With the lower cost of today’s solar components, engineers design solar mounting systems that perform well and look great. 
d. Easy Installation
Solar roof mounting system should be easy to install and also should be able to save labor cost by speeding up the installation.

meets those conditions above and helps to save your energy costs by generating solar power efficiently. Therefore, it becomes the best choice for your tile roof.

What’s the secret for attaching solar panels on roof without damage?

Solar hook for tile roof

The hooks are fastening and installing with minimal components. The T-bolt slot was designed to eliminate the need for an additional L-Feet.

Solar First tile roof mounting system installation
Advantages for Solar First tile roof solar hook :
1. High quality engineered system optimized for residential installation;
2. High quality aluminum provides high corrosion resistance;
3. Fast installation, minimal components resulting in low total installed cost;
4. Quick and inexpensive with direct lateral access to the rail without additional components;
5. Individual height adjustment ability;
6. Suitable for any cross rail system size.

Japan Postpones FIT Cuts by Six Months for Projects over 2 MW

A reduction of the feed-in tariff to ¥21/kWh (around US$0.19) for projects over 2 MW in size and approved between 2012 and 2014 will be applied starting from September 2019 and not from March, as originally planned. For approved projects with a capacity of less than 2 MW, however, no postponement has been granted.

Japan’s Ministry of Economy, Trade and Industry (METI) has extended the deadline for its planned FIT cuts for large-scale solar projects that were approved between 2012 and 2014, from March 31, 2019, to September 30, 2019. The plan to cut FITs in March for projects under 2 MW remains, however.

The deadline for the grid-connection of projects over 2 MW has also been postponed by another six months, to September 30, 2020. As such, the developers that are able to finalize their projects by this date will receive FITs of either ¥40 ($0.35), ¥36 or ¥32/kWh.

METI said in a statement that the FIT reduction will affect around 23.5 GW of capacity approved between 2012 and 2014, which represents roughly 44% of the total capacity of approved PV projects under the scheme. In an earlier statement to pv magazine, the Japan Photovoltaic Energy Association said it estimated the combined capacity of the projects to be around 20 GW.

U.S. research firm Fitch Solutions Macro Research recently said in a report that it expects to see a further 17 GW of solar PV plants connected to the Japanese grid by 2020.

The decision to provide developers with more time to finalize their projects followed concerns raised by investors and developers about the timeline of the cuts. In a joint statement, the Japanese Chamber of Commerce for America, Australia-New Zealand, Canada and France, and the European Business Council called on the country’s government to ease the conditions for the FIT reduction.

They claimed an abrupt cut, which makes no distinction between assets that have achieved development or construction milestones and which have credible sponsors, and projects that lack such attributes, would undermine confidence in the security, stability and predictability of Japanese market rules.



Antaisolar products recommended: solar pv mounting system ,solar panel roof mounting system ,adjustable solar panel mounting system etc here!

Antaisolar: we will move headquarter to premises in W Square

To all our partners,
Please be informed that our headquarter is going to move to a new and modern premise besides the most gorgeous sea of Xiamen on December 30, 2018.
 
New address is as below:
30F, W Square, 1801 Huandao East Road, Siming District, Xiamen, China
Phone number, Fax number and E-mail address are the same without change.
Please revise your record and send all your new correspondence to the above new address from December 30, 2018.
Thanks and best regards!

Antaisolar: Provided Pile Ground Solar Racking for the 2.2MW Project in South Korea

The Buyeo Dugokri 2.2MW in South Korea was completed last month. Antaisolar provided ground pile solar mounting system for the project, which could be adjusted in east-west direction.

According to the requirements of the clients and taking into account the local conditions, Antaisolar engineers first gave a solution of double piles. Later, considering the cost optimization, engineers analyzed the data again and put forward adjustable single pile mounting system with designed wind speed 28M/S, snow pressure 0.5KN/sqm, angle setting at 18 degrees, which is flexible and adjustable. Jaegang Electricity Co., Ltd takes charge of this project and covers the installation with Miso Design. 

Besides, high degree of pre-assembly components can save on-site installation time; safe and reliable structure design can withstand the worst local climatic conditions; Taking all factors and the actual requirements of the clients as the starting point, to provide them with the best solution, is the business attitude that Antaisolar always adheres to.


Why are Korean projects of high quality keep coming?

According to the statistics from the overseas sales team , Antaisolar has provided solar mounting solutions for nearly 10 cases of Korean cases since October this year.


The Korean market is undoubtedly the highlight of the global PV market in 2019, whether it is driven by the current policies-related PV industry or South Korea's geographical resources. It is also meaningful for Antaisolar to develop a good relationship with Korean local excellent agent in 2018. In the future, Antaisolar will continue to provide Korea with a stable and reliable solar solutions to boost  Korea's renewable energy development!


More other products like Solar Ground Mount Racking,Pitched Roof Solar Mounting etc at Antaisolar! 

Antaisolar- Offer Solar Racking for One Gas Station Roof Project in Philippines

Gas station roof turned into PV power station

Antaisolar provided roof mounting system for a gas station located in Antipolo, Philippines. This project was handled by SolarTech Renewable Solutions, who is the distributor of Antaisolar in Philippines. Besides, this project is the first one after both sides achieving friendly cooperation. The 50KW roof project adopted L bracket and corresponding accessories with estimated annual power generation of 57,000kWh.

The installation of a distributed PV power generation system on the roof of the existing gas station can not only meet the electricity demand but also upload the surplus power generated by the PV power to the power grid, which is a new profit model for the existing gas station to help it create more benefits.

Successfully partnered with SolarTech Renewable Solutions

Antaisolar has long been committed to the global layout. With the rapid growth of business volume, Antaisolar have been successfully provided solar rackings for utility projects such as hospitals, schools, seaports and so on. Since then, it seems that cooperating with local distributors or agents to provide products more conveniently and efficiently has naturally become a must.

As the first solar racking enterprise of China to enter the Japanese market, Antaisolar will continue to focus on the countries and regions along the “Belt and Road” while keeping deepening its mature market so as to become the superb enterprise in high-quality development of new energy.




More about solar racking solutions or other products like solar panel mounting structure, Ballasted flat roof mounting system at Antaisolar。 

Antaisolar shined at the 2018 SNEC PV show in China

This exhibition is coming to the end, Antaisolar has brought in various types of standing seam roof mounting systems and ground mounting systems to the exhibition. Our exhibits are highly praised, especially, the aluminum profile racking with fluorocarbon surface treatment and wood-grain transfer, which had attracted a lot of attention.

Antaisolar , focusing on new energy field for almost 12 years, has accumulative 6GW solar racking shipment until 2017. With owned aluminum factory, we have a better quality control over the whole processing.

The clients to the booth were quite interested in roof mount solution, the solar ground screw foundation also become the popular one for ground mounting use. Another eye-catching product is our pile ground mounting system, which can achieve east-west direction adjustable to better applied in hillside area.

We appreciate all friends has stopped by and hope in the near future to cooperation with you.

Article from solar racking suppliers,Antaisolar.com

Japanese Solar Energy Authority Magazine PVeye interviewed Antaisolar General Manager

As a Chinese company that ranked first in export volume in the Japanese market for many years, Antai became the only Chinese solar mounting system manufacturer to be interviewed.

This monthly magazine mainly interviews Chinese PV companies with a leading market share in Japan, and reviews the ups and downs of China's PV manufacturing industry in the past 20 years.

In the past 2017, Antai's solar mounting system accumulated shipments exceeded 1GW, of which the Japanese market accounted for 50%, China accounted for 20%, and other markets such as Southeast Asia and Australia accounted for 30%, undoubtedly reflecting the market competitiveness of Antai’s products.

Opportunity coexist with strength make products popular in the Japanese market

Since entering the Japanese market in 2011, Antaisolar has been making great strides in the exploration of market. Due to the FIT legislation formulated by the Tokyo, high subsidies for on-grid tariffs have led to the strong development of the solar market. It is under this opportunity that Antai eventually won widespread recognition from the Japanese market for its years of experience in R&D and production of aluminum profiles and its adherence to high quality products.

Never forget why you started and layout the world

In the interview, Ms. Huang Liqin, the general manager of Antaisolar, claimed that no matter how volatile the market competition is, always insisting on product quality is the basic literacy of a company. Furthermore, Antaisolar has a complete industrial chain of aluminum profiles that integrates casting, extrusion, oxidation, and finishing of aluminum. It can control product quality from the material side. Under the circumstance of guaranteeing quality, trying to control costs is a conscience of an enterprise. Antaisolar will optimize and upgrade products from the material side and continue to provide global customers with high-quality, convenient, and efficient solar mounting solutions.

Article from www.antaisolar.com

Antaisolar presented at PV EXPO 2018 in Tokyo

From 28th Feb. to 2nd Mar., the 9th PV EXPO Exhibition was held in Tokyo. Antaisolar’s leaders and sales team went to the exhibition after the Chinese New Year. Unique design of the booth and bright aluminum solar rackings attracted lots of clients.

In this exhibition, Antaisolar had displayed a series of products, such as CG ground mounting system, pile driven mounting system and adjustable ground mounting system and so on, which gave a nice experience to our clients. Besides, we also showed the ground screw which produced by using 100% fully mechanically automatic welding, and the fences used for solar power station.

Antaisolar has been in leading position in the Japanese photovoltaic market for many years. Solar ground mounting systems made of AL6005-T6 offer clients with convenient solar solutions. High pre-assembled components could save much installation time and cost for labors. At the same time, we could design the system based on customers’ demands, if need, we could also offer customization. To have a better support during installation or any emergency needs, we set up a warehouse in Japan.

The popularity of Antaisolar booth attracted the Japanese media to come to interview and report. Antaisolar representatives introduced company’s detailed development and unique advantages in Japanese solar market over the past years, like having own aluminum factory, which has strong production ability. At the same time, sales representatives and technical team had very successful communications with clients. Antaisolar gained a lot from this event.

Antaisolar solar racking utilized for rooftop project in Malaysia

The 500KW rooftop project located in Kedah, Malaysia, provide by Antaisolar, has completed the installation work by the end of December 2017. Antaisolar provided the full set of solution by using L feet and light rails with other supporting accessories. The roof solar plant is estimated to power the electricity use in factory.

Due to the double benefits of environmental protection and economic income of solar power generation, nowadays more and more roofs of factory are utilized, combined with the actual situation of metal roof sheet, using the corresponding solar mounting system. Antaisolar offer diversified roof clamps for metal roof to meet different demands.

In the past 2017, Antaisolar provided about 1GW solar mounting solution for all types of roof and ground mount worldwide.

Article from China Photovoltaic Mounting Provider: www.antaisolar.com.

Antaisolar achieved accumulative 1GW solar racking shipment in past year!

In the past 2017,Antaisolar provided about 1GW solar mounting solution for all types of roof and ground mount worldwide.

Established in 2006, Antaisolar (Solar Mounting System Manufacturers) is committed to the manufacture of aluminum profiles over the past years. In 2007，Antai( Antaisolar's headquarter)further expanded its PV industry chain business to the development and construction of solar plants, including one-stop turnkey project of consulting, design, system integration ,operation and maintenance. As one of the most competitive suppliers of diversified aluminum applications, Antai Advanced into the business of building aluminum profiles, and expanded aluminum production base to successfully operate the production and sales of aluminum formwork system.

Combined with its own advantages, the integration of multi-party resources, Antai has got a certain achievements as follows:
(I) Solar mounting systems: Accumulative solar mounts shipment about 1GW in 2017, providing solar solutions for global PV power plants.
(II) Solar plant EPC services: Nearly 10MW solar power stations of various types developed and built in 2007.
(III) Aluminum formwork systems: 30,000 square meters of aluminum formwork system sold.