From 28th Feb. to 2nd Mar., the 9th PV EXPO Exhibition was held in Tokyo. Antaisolar’s leaders and sales team went to the exhibition after the Chinese New Year. Unique design of the booth and bright aluminum solar rackings attracted lots of clients.
In this exhibition, Antaisolar had displayed a series of products, such as CG ground mounting system, pile driven mounting system and adjustable ground mounting system and so on, which gave a nice experience to our clients. Besides, we also showed the ground screw which produced by using 100% fully mechanically automatic welding, and the fences used for solar power station.
Antaisolar has been in leading position in the Japanese photovoltaic market for many years. Solar ground mounting systems made of AL6005-T6 offer clients with convenient solar solutions. High pre-assembled components could save much installation time and cost for labors. At the same time, we could design the system based on customers’ demands, if need, we could also offer customization. To have a better support during installation or any emergency needs, we set up a warehouse in Japan.
The popularity of Antaisolar booth attracted the Japanese media to come to interview and report. Antaisolar representatives introduced company’s detailed development and unique advantages in Japanese solar market over the past years, like having own aluminum factory, which has strong production ability. At the same time, sales representatives and technical team had very successful communications with clients. Antaisolar gained a lot from this event.
2018年3月19日星期一
2018年1月23日星期二
Antaisolar solar racking utilized for rooftop project in Malaysia
The 500KW rooftop project located in Kedah, Malaysia, provide by Antaisolar, has completed the installation work by the end of December 2017. Antaisolar provided the full set of solution by using L feet and light rails with other supporting accessories. The roof solar plant is estimated to power the electricity use in factory.
Due to the double benefits of environmental protection and economic income of solar power generation, nowadays more and more roofs of factory are utilized, combined with the actual situation of metal roof sheet, using the corresponding solar mounting system. Antaisolar offer diversified roof clamps for metal roof to meet different demands.
In the past 2017, Antaisolar provided about 1GW solar mounting solution for all types of roof and ground mount worldwide.
Article from China Photovoltaic Mounting Provider: www.antaisolar.com.
Due to the double benefits of environmental protection and economic income of solar power generation, nowadays more and more roofs of factory are utilized, combined with the actual situation of metal roof sheet, using the corresponding solar mounting system. Antaisolar offer diversified roof clamps for metal roof to meet different demands.
In the past 2017, Antaisolar provided about 1GW solar mounting solution for all types of roof and ground mount worldwide.
Article from China Photovoltaic Mounting Provider: www.antaisolar.com.
2018年1月9日星期二
Antaisolar achieved accumulative 1GW solar racking shipment in past year!
In the past 2017,Antaisolar provided about 1GW solar mounting solution for all types of roof and ground mount worldwide.
Established in 2006, Antaisolar (Solar Mounting System Manufacturers) is committed to the manufacture of aluminum profiles over the past years. In 2007，Antai( Antaisolar's headquarter)further expanded its PV industry chain business to the development and construction of solar plants, including one-stop turnkey project of consulting, design, system integration ,operation and maintenance. As one of the most competitive suppliers of diversified aluminum applications, Antai Advanced into the business of building aluminum profiles, and expanded aluminum production base to successfully operate the production and sales of aluminum formwork system.
Combined with its own advantages, the integration of multi-party resources, Antai has got a certain achievements as follows:
(I) Solar mounting systems: Accumulative solar mounts shipment about 1GW in 2017, providing solar solutions for global PV power plants.
(II) Solar plant EPC services: Nearly 10MW solar power stations of various types developed and built in 2007.
(III) Aluminum formwork systems: 30,000 square meters of aluminum formwork system sold.
Established in 2006, Antaisolar (Solar Mounting System Manufacturers) is committed to the manufacture of aluminum profiles over the past years. In 2007，Antai( Antaisolar's headquarter)further expanded its PV industry chain business to the development and construction of solar plants, including one-stop turnkey project of consulting, design, system integration ,operation and maintenance. As one of the most competitive suppliers of diversified aluminum applications, Antai Advanced into the business of building aluminum profiles, and expanded aluminum production base to successfully operate the production and sales of aluminum formwork system.
Combined with its own advantages, the integration of multi-party resources, Antai has got a certain achievements as follows:
(I) Solar mounting systems: Accumulative solar mounts shipment about 1GW in 2017, providing solar solutions for global PV power plants.
(II) Solar plant EPC services: Nearly 10MW solar power stations of various types developed and built in 2007.
(III) Aluminum formwork systems: 30,000 square meters of aluminum formwork system sold.
2017年12月13日星期三
The second phase of the roof solar plant in Antaisolar factory has been completed
Following the first phase of roof solar plant put into operation by Antai(Antaisolar's head office) in May this year, the second phase of it was unveiled again at Antai factory(Your best metal roof mounting system manufacturer). Located on the metal sheet roof, with a total area of 10,000 square meters, Antai engineers provided standing seam roof mount solution to offer the simple and stable fixing , ensuring roof waterproofing while reducing the indoor temperature, which can achieve energy conservation and environmental protection.
The project ,with the installed capacity of 800 kilowatts, commenced on November 20, has nearly completed the panel installation work and is expected to connect to the grid next month. Its estimated annual generating capacity of 880,000 KWh, as a strong supply of clean energy, it will provide a good guarantee for the daily operation of the factory.
As the first company to invest in solar power station in Changtai County, Zhangzhou, Antai has cooperated with several enterprises in Changtai to effectively utilize the existing roof, providing one-stop power station engineering service to reap the both economic and environmental benefits.
The project ,with the installed capacity of 800 kilowatts, commenced on November 20, has nearly completed the panel installation work and is expected to connect to the grid next month. Its estimated annual generating capacity of 880,000 KWh, as a strong supply of clean energy, it will provide a good guarantee for the daily operation of the factory.
As the first company to invest in solar power station in Changtai County, Zhangzhou, Antai has cooperated with several enterprises in Changtai to effectively utilize the existing roof, providing one-stop power station engineering service to reap the both economic and environmental benefits.
2017年11月21日星期二
Antaisolar solar racking utilized for 1MW project in South Korea
Recently, Antaisolar provided pile ground solar racking for 1MW solar project in Chungnam, South Korea. For the project was installed on the slope(10 degrees), Antaisolar offered the pile driven system solution with the designed wind speed of 25m/s and snow load of 0.5kn/sqm according to local natural environment and construction condition. The project is nearly finished for the high installation efficiency of pile driven.
-The pile was 1.8 meters deep under the ground.
Antaisolar pile ground mounting system is a very economical solution for large scale installations, especially on uneven terrain. It’s a simple and quick installation system for the use of ramming post can eliminate the need for additional excavation works, and the pile-driven machine reduces labor and time remarkably on site. It can save lots of construction cost especially for large projects. Moreover, Antaisolar pile ground mounting system has good component compatibility, high rust-resistance and excellent weather resistant property.
Nowadays, Antaisolar pile ground solar solution has been successively used in different locations in South Korea, which is well recognized and widely praised by local customers.
2017年11月16日星期四
Antaisolar won the award of "Solar Cup" Annual Solar Bracket Enterprise in 2017
The 9th China International New Energy Conference & Exhibition was held in Wuxi to conduct the 2017 "Guangneng" CUp awards presentation ceremony of PV industry, a grand event comprised industry experts, business leaders and technical elites. Antaisolar was honored with the title of "annual solar racking enterprise" title, which fully demonstrated the industry's recognition and support to us.
Over ten years focus on the production &sales of aluminum profile, Antaisolar solar mounting system has acquired recognition worldwide for its high quality, ease to use and quick delivery time. A wide range of product includes flat roof solar racking, standing seam roof solar racking and ground solar racking etc. With multiple advantages, Antai has accumulative mounts shipment over 5GW and becomes one of the most leading suppliers of solar mounting systems.
Over ten years focus on the production &sales of aluminum profile, Antaisolar solar mounting system has acquired recognition worldwide for its high quality, ease to use and quick delivery time. A wide range of product includes flat roof solar racking, standing seam roof solar racking and ground solar racking etc. With multiple advantages, Antai has accumulative mounts shipment over 5GW and becomes one of the most leading suppliers of solar mounting systems.
2016年11月23日星期三
Optimal tilt of solar panels
To get the most from solar panels, you need to point them in the
direction that captures the most sun, This page is designed to help you
find the best placement for your solar panels in your situation. This
advice applies to any type of panel that gets energy from the sun;
photovoltaic, solar hot water, etc. We assume that the panel is fixed,
or has a tilt that can be adjusted seasonally.
Fixed or Adjustable?
It is simplest to mount your solar panels at a fixed tilt and just leave them there. But because the sun is higher in the summer and lower in the winter, you can capture more energy during the whole year by adjusting solar panels according to the season. The following table shows the effect of adjusting the angle, using Tilt Of Solar Panels a system at 40° latitude as an example.
In short, Adjusting Solar Panels twice a year gives you a meaningful boost in energy. Adjusting four times a year produces only a little more,Optimal tilt of solar panels will bring you more energy.
Fixed Tilt
If your solar panels will have a fixed tilt angle, and you want to get the most energy over the whole year
1:If your latitude is below 25°, use the latitude times 0.87.
2:If your latitude is between 25° and 50°, use the latitude, times 0.76, plus 3.1 degrees.
Adjusting the tilt twice a year
If you are going to adjust the tilt of your solar panels twice a year, and you want to get the most energy over the whole year,
If your latitude is between 25° and 50°, then the best tilt angle for summer is the latitude, times 0.93, minus 21 degrees. The best tilt angle for winter is the latitude, times 0.875, plus 19.2 degrees.
These calculations are based on an idealized situation. They assume that you have an unobstructed view of the sky, with no trees, hills, clouds, dust, or haze ever blocking the sun.
Related Tags: Photovoltaic Mounting Provider
Fixed or Adjustable?
It is simplest to mount your solar panels at a fixed tilt and just leave them there. But because the sun is higher in the summer and lower in the winter, you can capture more energy during the whole year by adjusting solar panels according to the season. The following table shows the effect of adjusting the angle, using Tilt Of Solar Panels a system at 40° latitude as an example.
In short, Adjusting Solar Panels twice a year gives you a meaningful boost in energy. Adjusting four times a year produces only a little more,Optimal tilt of solar panels will bring you more energy.
Fixed Tilt
If your solar panels will have a fixed tilt angle, and you want to get the most energy over the whole year
1:If your latitude is below 25°, use the latitude times 0.87.
2:If your latitude is between 25° and 50°, use the latitude, times 0.76, plus 3.1 degrees.
Adjusting the tilt twice a year
If you are going to adjust the tilt of your solar panels twice a year, and you want to get the most energy over the whole year,
If your latitude is between 25° and 50°, then the best tilt angle for summer is the latitude, times 0.93, minus 21 degrees. The best tilt angle for winter is the latitude, times 0.875, plus 19.2 degrees.
Northern hemisphere
|
Southern hemisphere
|
|
Adjust to summer angle on
|
March 30
|
September 29
|
Adjust to winter angle on
|
September 12
|
March 14
|
These calculations are based on an idealized situation. They assume that you have an unobstructed view of the sky, with no trees, hills, clouds, dust, or haze ever blocking the sun.
Related Tags: Photovoltaic Mounting Provider
订阅：
博文 (Atom)