2022年9月14日星期三

What Are The Advantages of Solar Carport Mounting System?

 The solar carport mounting systems is very popular in developed countries. It mainly combines photovoltaic modules with the carport roof, which can not only meet the parking demand, but also provide power to the grid, increase income, and photovoltaic power generation is energy-saving and environmentally friendly. For large hospitals with limited land, building a green energy-saving solar carport is an effective solution.

Advantages of photovoltaic carport

Photovoltaic carport is a power generation system that uses solar cells to directly convert solar energy into electrical energy. Its main components are photovoltaic modules, brackets and inverters. Its advantages are high reliability, long service life, no environmental pollution, independent power generation and grid-connected operation, it is welcomed by households and enterprises, and its development prospects are broad.

Energy saving brings benefits at the same time

Solar carports came into being. Compared with installing photovoltaic modules on the roof of the carport, the combination of photovoltaic modules and the roof of the carport can save costs. It can not only realize all the functions of the traditional carport, but also generate electricity to bring benefits to car owners. It is generally supported by steel structure, which is simple and elegant, stylish and beautiful. It is a clean and environmentally friendly new energy source, effectively alleviating the social environment and energy pressure.

Distributed photovoltaic grid-connected system refers to a grid-connected power generation system that uses photovoltaic components to directly convert solar energy into electrical energy. The system is located near the user, and the generated electricity can be used locally. It can be connected to the grid at a voltage level of 10 kV and below. The total installed capacity of a single interconnection point (380V) does not exceed 6 MW, and the total installed capacity of a single interconnection point on the 220V user side. The capacity does not exceed 8 kilowatts.

The distributed photovoltaic power generation system can be installed in any place where there is sunlight, including the ground, the top of the building, the side elevation, and the balcony. Among them, it is widely used in schools, hospitals, shopping malls, villas, houses, factories, enterprises and institutions roofs, carports, bus stop signs; it can be installed on concrete, color steel plate and ceramic tile roofs.

The types of photovoltaic carports are divided into double carports and multiple carports. Most of them are modular in design, which can be used alone or in a variety of combinations. They are easy to expand, ranging from a few parking spaces to hundreds of parking spaces, and are highly flexible. If ordinary photovoltaic modules are used, the overall cost is lower. If the installed capacity is large, the income will be higher and the investment payback period will be short.

Choosing the Ideal Solar Panel Mounts

In this era when electricity costs are hitting record highs and may continue to rise, solar panels seem to be the best invention of mankind so far. However, solar panels require professional installation. If you do not install it correctly, it may become a burden for us. The solar panel support is very important. There are different types, in addition to cost, you must also consider their convenience and practicality.


There are currently three basic types of solar panel brackets on the market. Each type is developed for a specific type of photovoltaic system so that your panels can perform optimally.

Pole mounting is very popular because you only need to mount it on the top of the pole. It also has a track rod mount to make the panel follow the sun. This allows the solar device to absorb as much sunlight as possible during the day. This means you will be able to take full advantage of your photovoltaic system.


The roof ground mount is one of the most expensive mounts available. This is because they are specifically designed to hold large panels in place. They are very durable, no matter how big the panel is, they are guaranteed to support your panel. They are also called universal solar panel supports because they can be used to support different types of solar panels. You can choose to place it on the roof or on the ground. Either way, you should remember to make sure that the city allows this type of installation.

Flush mounts are the cheapest of all three mounts, and this is for good reason. They are only designed to support small photovoltaic systems, i.e. small panels. For those who want to install solar panels on their RVs or roofs, this is the ideal way to install solar panels. However, they are not as flexible as other mounts. In addition, you must consider the distance between the panel and the roof, because if it is installed too close to the surface, it will overheat very quickly.


Xiamen Mibet New Energy Co., Ltd. specializes in manufacturing all types of solar panels,pv ground mount and other related products for many years.  We enjoy the right to manage our own imports and exports.



PV Mounting System for Tiled Roof

 

Tile Solar Roof Mounting System has certain market demand in Europe, Southeast Asia and Australia. Most of customers are looking for Flexible installation method. Mibetsolar always committed to providing simple and affordable solutions.


Roof Solar Mounting System


Here is our more information of Tile Roof Mountings,It is simple and cost-effective installation solution,could meet Framed or Frameless moudle type,used for variety of tile roof types,like cement/flat Tile Roof,pantiles etc.

Generally,Tile Roof Mounting System can be composed of the following solar components,like Rail,Mid Clamp,End Clamp,Roof Hook,Splice etc.When we design Tile Roof Mounting Solution for our customer,one of our customer request for some parts of Roof Hooks to be adjustable to fit for his roof.And then we delivery samples of Adjustable Hooks for him checking quality firstly.

Actually,any solution has more possibilities and full of flexibility,we could design a specific solution according to your project details,also could provide OEM service,welcome come up with your good idea about our solutions,Let us make progress together.

If you are interested in other Solar Mounting System,pls contact us or visit our website:www.mibetsolar.com for more details.



4 Common Types Of Solar Photovoltaic Brackets

 

4 Common Types Of Solar Photovoltaic Brackets


1. Sloping roof photovoltaic system:

Use adjustable height parts to meet some requirements of different thicknesses of tile roofs.
  • Most of the accessories are designed with multiple openings, which can realize the flexible adjustment of the position of the bracket.
  • Does not damage the waterproofing system of the roof.


2. Flat roof photovoltaic system:
There are also many forms of photovoltaic system flat roofs, such as: concrete flat roofs, color steel flat roofs, steel structure flat roofs, spherical joint roofs, etc. Their characteristics are:
  • It can be laid neatly on a larger scale.
  • Have a variety of stable and reliable connection with the foundation.


3. Ground photovoltaic system:
Generally used in ground photovoltaic power station projects, concrete strips are often used as the basic form. Its characteristics are:
  • The structure is streamlined and can be installed quickly.
  • The adjustment form is relatively flexible and can be adjusted according to the complex requirements of the construction site.

4. Column solar support:
This system is a ground-reinforced structure mainly to meet the installation requirements of large-size battery modules, and is generally used in areas with high wind speeds.

Xiamen Mibet Energy Co., Ltd. is a high-tech enterprise with advanced patented technology and efficient services. It specializes in R&D, manufacturing and sales of solar energy products. It has successively launched ground photovoltaic brackets, roof photovoltaic brackets, floating systems on water, and intelligent tracking. A series of high-quality products and solutions such as systems and distributed photovoltaics.

Important considerations for installing a solar system

 

With the expansion and popularity of energy-saving goals, the use of solar panel systems in people's daily lives has also become more and more popular. When installing a solar system, the most important consideration may be the construction and selection of the solar panel support. The success of solar systems depends on whether there is enough sunlight to capture enough usable solar energy to convert into usable energy.


If your system is not installed correctly, you will not get enough sunlight to make your investment viable. There are generally two types of solar installations: mobile and non-mobile solar installations. The key to the solar panel bracket is to have equipment that can be used for several years and withstand different weather conditions.


There are four commonly used materials for solar panel brackets: aluminum, angle iron, wood and stainless steel. Aluminum is light and corrosion resistant, but easy to use but difficult to weld. Angle iron works well, but it corrodes quickly. If you live in a humid environment, you should avoid using this material. Wood is cheap and easy to obtain, and although it is easy to work, it may not be affected by the weather for a long time. Stainless steel is very suitable for longevity, but it is expensive to use. This is great in areas with many different weather types.


A good bracket will take into account the wind load at the specific angle where you want to install the solar panel. Good advice from a local contractor can provide you with guidance in this regard so that you can consider this factor. In general, plan for the worst type of weather that may occur in your area and consider it based on the type of installation you purchase and install.


If you plan to use the tracker with solar panels, you need to make sure that it requires very little energy and electricity, just like a single-axis tracker. The tracker allows your solar panel to move and capture most of the sun's rays for energy. It is recommended to use concrete with anchor bolts to hold your tracker firmly in place.


Solar panel supports can also be placed on the roof, but it is more complicated than placing them on the ground or poles. Solar panels installed on the roof will definitely cause roof leaks, so please consider the weather in your area before installing such brackets. Over time, continuous leaking of your roof can cause serious damage. The advantage of this type of setup is that it requires less space for solar power generation because the roof has already allocated space on your property.


Finally, when it comes to solar panel supports, what you need is functionality and durability. You will plan ahead where you need to place the solar system and predict different types of weather in the climate. Then, the choice of materials will correspond to this, and your mount type will follow. Once you have all the details, choosing your mount will be easy.

4 Types of Solar Tracking Mounting System

 

The solar tracking systems are gaining popularity day by day. It has a lot of potential and that is why it is making a huge impact on lifestyles. These solar tracking systems have a lot of benefits and potentials which are of great usage.


PV panel or solar tracking panel mountings come in varied sizes and shapes, which depend on the purpose. Some of these can be mounted over a pole for ease of tracking the sun all through the day. Read on to know about 4 of the main types of solar tracking mounts, and which one is ideal for your solar panel system.


Solar Mount Rail System


These can be used for tilted mounts or for flat roof mounts. Tilt mounts can be placed in the horizontal mode or in a horizontal posture, or in a vertical posture known as the landscape mode. This type of rail system is easy and versatile, and offers plenty of choices. Most of the common rail mounts are first attached onto roofs.


Solar Panel Ground Mounting System


These are possibly the most convenient way to have solar panels mounted. This type of mount looks like an A-frame. It is safest to get this type of structure attached to a slab of cement to keep it secure in position. These types of mounts have been designed to handle anywhere between 1 and 8 solar modules. Such kinds of mounts can be utilized for fixing solar panels to a vertical surface, a roof or to the ground. Some of these mounts are fixed while others have legs which can be adjusted or tilted. There are optional tilt legs of adjustable variety, which area available for panels of varied styles.


Solar Panel Pole Rack Mounting System


These can easily be set up atop a strong pole, and are usually recommended for home solar arrays. Pole top mounts can easily be set up, and can keep solar panels off the surface of the ground and out of danger. These can easily be adjusted and can allow convenient removal of snow. But once snowing stops and the sun peeps through again, you will have to sweep snow from the panels. Naturally, you should consider you should have them placed and how high from the ground and how far from your home you would like to get them placed.



Solar Panel Roof Mounting System


These are great in appearance, but it is difficult to reach them for the adjustment of the angle. You have to consider whether your roof is sloped enough to allow maximum efficiency of the solar panels. You should also consider whether you need to tilt the legs in order to make your panels face the sun in a more perpendicular posture.


Mibetsolar supply reliable and economical solar PV mounting system solutions,contact us and get details.

How to avoid the risks of floating photovoltaic system projects?

Floating photovoltaic power plants have spread all over the world. There are nearly 800 surface photovoltaic power plants in operation and under construction. The cumulative global application has exceeded 1.1GW, involving multiple application scenarios such as drinking water reservoirs, hydroelectric power station reservoirs, offshore waters and extreme cold areas. , Reliability and environmental protection have been widely recognized.
Floating PV Mounting System
How to avoid the risks of floating photovoltaic system projects has become a focus of the industry. We have summarized the following three points. If these three points are well done, project risks can be greatly reduced.

1. Product design is the source

The most basic components of the floating array are floating bodies, brackets, bolts and nuts for water surface photovoltaics. Product design, material selection, processing technology, product testing, etc. not only affect the strength, toughness, environmental protection, weather resistance, and service life of the product itself, but are also basic factors that determine the stability and safety of the floating power station. Using low-end inferior materials and cutting corners to reduce the wall thickness of the floating body will greatly reduce the service life of the system and bring project risks. In addition to adequate project site exploration and strict simulation calculations, a large number of experimental verifications and large-scale actual project operation verifications are also indispensable.

2. The anchoring system design is the key

The role of the anchoring system is to fix the floating array, respond to rising and falling water levels, resist strong winds and waves and water flow, control the displacement range of the floating array, and ensure the safe and stable operation of the surface photovoltaic power station. The design of anchoring system needs to comprehensively consider key environmental factors such as local wind load, water depth and drop, water size, topography, etc. It needs to pass "theory + experiment" analysis and accumulate multiple project implementation experience to ensure safety.

3. After-sales technical guidance is a guarantee

Rich experience in large-scale project installation and construction guidance, professional after-sales technical team, scientific construction platform construction suggestions, and sub-square temporary anchoring schemes and other technical guidance guarantees play an important role in the smooth implementation of the entire project, and can reduce the risk of construction To the lowest. Construction technical guidance is very important to the progress of the project, but a very small number of manufacturers have insufficient after-sales technical guidance and have not fulfilled their responsibilities and obligations.

In order to reduce the project risk as much as possible, the supplier needs to provide specific construction platform design suggestions according to different project terrain characteristics, matching the site terrain conditions and construction schedule requirements.

Xiamen Mibet New Energy Co., Ltd. is a high-tech enterprise with advanced patented technology and efficient services. It specializes in the research and development, manufacturing and sales of solar energy products, and is committed to providing the most reliable and economical solar photovoltaic mounting system solutions. Since the establishment of the company, solar products have been sold to more than 100 countries and regions, becoming one of the largest exporters of solar photovoltaic products.